84IP Routing Configuration and Management

router ospf enable command

The router ospf enable command is used to enable OSPF globally on the switch.

The syntax of the router ospf enable command is:

router ospf enable

The router ospf enable command is executed in the Global

Configuration mode.

no router ospf enable command

The no router ospf enable command is used to disable OSPF globally on the switch.

The syntax of the no router ospf enable command is:

no router ospf enable

The no router ospf enable command is executed in the Global

Configuration mode.

router ospf command

The router ospf command is used to place the switch into Router

Configuration mode for the purposes of OSPF configuration.

The syntax of the router ospf command is:

router ospf

The router ospf command is executed in the Global Configuration mode.

default router ospf command

The default router ospf command is used to return the switch to the default OSPF setting; which is disabled.

The syntax of the default router ospf command is:

default router ospf enable

The default router ospf command is executed in the Global

Configuration mode.

accept adv-rtr command

The accept adv-rtrcommand is used to configure the router to accept advertisements from another router in the system.

The syntax of the accept adv-rtrcommand is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 84
Image 84
Nortel Networks NN47200-503 manual Router ospf enable command, No router ospf enable command, Router ospf command