Nortel Networks NN47200-503 manual Static Routes tab, Click Filter, Insert Static Route screen

214IP Routing Configuration and Management

PathType	Select this check box and enter a value to filter
	on the route path type.
Pref	Select this check box and enter a value to filter
	on the route preference value.

3Click Filter.

—End—

The tab will now be filtered on the criteria specified.

Static Routes tab

The Static Routes tab is used to configure static routes for the switch. To configure a static route with this tab, follow this procedure:

Step Action

1Open the IP screen by selecting IP Routing > IP from the menu. Select the Static Routes tab. This tab is illustrated below.

Static Routes tab

2Click Insert. The Insert Static Route screen opens. This screen is illustrated below.

Insert Static Route screen

3In the fields provided, enter the information for the new static route. The following table outlines the fields on this screen.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks