Nortel Networks NN47200-503 manual Ip ospf primary-md5-key command, Ip ospf priority command

98IP Routing Configuration and Management

ip ospf network {broadcast passive}

The ip ospf network command is executed in the Interface

Configuration mode.

ip ospf primary-md5-key command

The ip ospf primary-md5-keycommand is used to configure the primary MD5 key to use for authentication in instances where interface authentication uses an MD5 key.

The syntax of the ip ospf primary-md5-keycommand is:

ip ospf primary-md5-key <key_value>

The <key_value> parameter is an integer value between 1 and 255.

The ip ospf primary-md5-keycommand is executed in the Interface Configuration mode.

ip ospf priority command

The ip ospf priority command is used to assign a priority to the interface for the purposes of Designated Router election.

The syntax of the ip ospf priority command is:

ip ospf priority <priority_value>

The <priority_value> parameter is the priority value assigned to the interface. This is an integer value between 0 and 255.

The ip ospf priority command is executed in the Interface

Configuration mode.

ip ospf retransmit-interval command

The ip ospf retransmit-intervalcommand is used to define the number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface.

The syntax of the ip ospf retransmit-intervalcommand is:

ip ospf retransmit-interval <interval>

The <interval> parameter is the number of seconds between retransmissions. This is an integer value between 0 and 3600.

The ip ospf retransmit-interval command is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks