78IP Routing Configuration and Management

default timers basic update command

The default timers basic update command is used to return the switch to the factory default RIP update timer.

The syntax of the default timers basic update command is:

default timers basic update

The default timers basic update command is executed in the Router Configuration mode.

default-metric command

The default-metriccommand is used to set the default RIP metric value.

The syntax of the default-metriccommand is:

default-metric <metric_value>

The <metric_value> parameter is an integer value between 0 and 15.

The default-metriccommand is executed in the Router Configuration mode.

default ip rip advertise-when-down command

The default ip rip advertise-when-down command is used to restore the default RIP advertise when down setting for the interface (disabled).

The syntax of the default ip rip advertise-when-down command is:

default ip rip advertise-when-down enable

The default ip rip advertise-when-down command is executed in the Interface Configuration mode.

default ip rip auto-aggregation command

The default ip rip auto-aggregation command is used to restore the default RIP auto aggregation setting for the interface (disabled).

The syntax of the default ip rip auto-aggregation command is:

default ip rip auto-aggregation enable

The default ip rip auto-aggregation command is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 78
Image 78
Nortel Networks NN47200-503 manual Default timers basic update command, Default-metric command