Nortel Networks NN47200-503 manual Timers basic timeout command, Timers basic update command

IP routing configuration using the CLI 69

The timers basic holddown command is executed in the Router Configuration mode.

timers basic timeout command

The timers basic timeout command is used to set the RIP timeout timer.

The syntax of the timers basic timeout command is:

timers basic timeout <timer_value>

The <timer_value> parameter represents a value between 15 and 259200 seconds.

The timers basic timeout command is executed in the Router Configuration mode.

timers basic update command

The timers basic update command is used to set the RIP update timer.

The syntax of the timers basic update command is:

timers basic update <timer_value>

The <timer_value> parameter represents a value between 0 and 360 seconds.

The default timers basic update command is executed in the Router Configuration mode.

ip rip advertise-when-down command

The ip rip advertise-when-downcommand is used to enable RIP advertisements on the interface being configured even when that interface is not operational. The subnet on which the switch has a RIP enabled interface is advertised even if that particular network is no longer connected (no link in the connected VLAN is in the Link-Up state). This setting will take effect whenever the value is changed by the user or after the first Link-Down transition.

The syntax of the ip rip advertise-when-downcommand is:

ip rip advertise-when-down {enable}

Advertise when down functionality is disabled by default.

The ip rip advertise-when-downcommand is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks