Nortel Networks NN47200-503 manual Creating a Brouter port, Port dialog IP Address tab

286IP Routing Configuration and Management

2Select Edit > Port from the Device Manager menu. The Port dialog opens with the Interface tab selected. Select the IP Address tab. This tab is illustrated below.

Port dialog - IP Address tab

3Use the provided fields to view the brouter port settings. These fields are outlined in the following table.

IP Address tab fields

Field	Description
IpAddress	The IP address assigned to this brouter.
NetMask	The subnet mask associated with the brouter
	IP address.
BcastAddrFormat	The IP broadcast address format used on this
	interface.
ReasmMaxSize	The size of the largest IP datagram which
	this entity can reassemble from incoming
	IP fragmented datagrams received on this
	interface.
VlanId	The VLAN ID associated with this brouter port.
MacOffset	The MAC address offset associated with this
	brouter port.

—End—

Creating a Brouter port

To create a new brouter port, use the following procedure:

Step Action

1Select a port on the Device Manager Front Panel view.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks