Ospf Accept Policy deletion

IP routing conﬁguration using the Java Device Manager 275

3The Insert OSPF Accept dialog opens. This dialog is illustrated below.

Insert OSPF Accept dialog

4Using the ﬁelds provided, create the new accept policy. These ﬁelds are described in the following table.

Insert OSPF Accept ﬁelds

Field	Description

AdvertisingRtr	The advertising router associated with the accept
	policy.

Enable	Indicates whether the policy is enabled.

MetricType	Indicates the metric type associated with the
	policy. Available options are: type 1, type 2, and
	any.

PolicyName	Indicates the name associated with the policy.

5Click Insert.

—End—

To delete an OSPF accept policy, use the following procedure.

Deleting an OSPF accept policy

Step Action

1From the Device Manager main menu, select IP Routing. The IP Routing menu appears.

2Select Policy. The Policy dialog appears.

3Select the OSPF Accept tab. The OSPF Accept window opens.

4Select an AdvertisingRtr to delete.

5Click Delete.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Page 275

Image 275

Nortel Networks NN47200-503 manual Ospf Accept Policy deletion, Deleting an Ospf accept policy Step Action

Contents

Conﬁguration-IP Routing Protocols Restricted rights legend General Page Date Revised Version Reason for revision Revision History Revision History Contents Index 314 Preface Series Switch Platforms Series Switch Model Key Features Related publications Nortel Ethernet Routing Switch 5500 Series Documentation Finding the latest updates on the Nortel web site How to get help IP addressing An Introduction to IP Routing Protocols Network and host boundaries in IP address classes Subnet addressing IP routing IP routing with VLANs IP routing using VLANs Multinetting Network with Multinetting Proxy ARP UDP broadcast Brouter port Routing and management Layer 2 versus Layer 3 modeSetting IP routing Management Vlan End Address Resolution Protocol ARPStep Action Proxy ARP Operation Proxy Address Resolution Protocol Proxy ARPStatic routes RIP operation Non-local static routesRouting Information Protocol RIP An Introduction to IP Routing Protocols RIP hop counts RIP metrics RIP Send and Receive Modes RIP send and receive modes Send Mode Description ResultReceive Result Mode Overview LimitationsOpen Shortest Path First Ospf protocol Ospf routing algorithm Beneﬁts Ospf router types Router Type Description Ospf router typesOspf host route Host route in LSA Ospf Enhancements Following is an example for deleting a host route R3config-router#Ospf virtual link Consider the following situation Virtual link diagramExample Conﬁguration Creating auto virtual link R1 config-router#auto-vlink Deleting auto virtual link R1 config-router#no auto-vlinkR3config#show ip ospf Following is an example for deleting an auto virtual link Route policies Preﬁx Lists Accept In PoliciesAnnounce Out Policies Redistribution Policies Virtual Router Redundancy Protocol Vrrp UDP broadcast forwarding Equal Cost MultiPath Ecmp Summary of Dhcp relay operation Differences between Dhcp and BootP Forwarding Dhcp packets Multiple BootP-DHCP serversForwarding Dhcp packets Dhcp operation To set DHCP, take the following steps Setting DhcpMultiple BootP/DHCP servers Dhcp relay Global Dhcp relay commands Command Description Dhcp relay forward path commands Command Description Interface Dhcp relay commands Command Description Automatic router ID change Avoiding duplicate IP addresses IP blocking Igmp snooping IP multicast propagation with Igmp routing Series switch ﬁltering IP multicast streams 1 , 5500 Series switch ﬁltering IP multicast streams 1 of 2 Igmp snooping conﬁguration rules Series switch ﬁltering IP multicast streams 2 An Introduction to IP Routing Protocols Global IP routing conﬁguration IP Routing Conﬁguration and Management Basic Ospf conﬁguration Open Shortest Path First Ospf initial conﬁguration Assign an IP address to Vlan Enable Ospf in VlanReturn to Global Conﬁguration mode Basic Asbr conﬁguration Conﬁguring Ecmp for Ospf Log into the Ospf router conﬁguration modeEnable Asbr functionality Ip blocking-mode command IP conﬁguration commandsIp routing command No ip routing command Interface vlan 1 Interface vlan commandIp address command Layer 3 routable VLANs No ip address A.B.C.D W.X.Y.Z No ip address commandAdding secondary IP interfaces Step Action Deﬁne a secondary IP interface on the Vlan Remove the primary IP interface from the Vlan Show vlan ip commandShow vlan ip command shows routable Vlan conﬁgurations Syntax for the show vlan ip command is Static route commandsShow ip route static command Show ip route command Ip route A.B.C.D W.X.Y.Z O.P.Q.R Show ip route summary commandIp route command Show ip route summary No ip route A.B.C.D W.X.Y.Z O.P.Q.R No ip route commandIp route enable command Ip route A.B.C.D W.X.Y.Z O.P.Q.R enable Ip route A.B.C.D W.X.Y.Z O.P.Q.R disable Ip route disable commandTraceroute command Ip route enable parameters Parameter Description Ip route weight command Show arp-table A.B.C.D Address Resolution Protocol ARP commandsShow arp command Show ip arp command Ip arp A.B.C.D aabbccddeeff unit / port vid Show ip arp static commandIp arp command Show ip arp static Ip arp-proxy command No ip arp commandIp arp timeout command Proxy ARP commands Router rip enable command Default ip arp-proxy commandShow ip arp-proxy interface command Routing Information Protocol RIP commands Timers basic holddown command Router rip commandNetwork command No network command Ip rip advertise-when-down command Timers basic timeout commandTimers basic update command Ip rip cost command No ip rip advertise-when-down commandIp rip auto-aggregation command No ip rip auto-aggregation command No ip rip default-supply command Ip rip default-listen commandNo ip rip default-listen command Ip rip default-supply command Ip rip listen command Ip rip holddown commandIp rip in-policy command No ip rip in-policy command Ip rip poison command No ip rip listen commandIp rip out-policy command No ip rip out-policy command Ip rip receive command No ip rip poison commandIp rip proxy-announce command No ip rip proxy-announce command No ip rip supply command Ip rip send commandIp rip supply command Show ip rip command Ip rip timeout commandIp rip triggered command No ip rip triggered command Default timers basic timeout command Default router rip commandDefault default-metric command Default timers basic holddown command Default ip rip auto-aggregation command Default timers basic update commandDefault-metric command Default ip rip advertise-when-down command Default ip rip enable command Default ip rip cost commandDefault ip rip default-listen command Default ip rip default-supply command Default ip rip out-policy command Default ip rip holddown commandDefault ip rip in-policy command Default ip rip listen command Default ip rip supply command Default ip rip proxy-announce commandDefault ip rip receive command Default ip rip send command Ip ospf apply accept command Default ip rip timeout commandDefault ip rip triggered command Open Shortest Path First Ospf commands Ip ospf spf-run command Ip ospf apply redistribute direct commandIp ospf apply redistribute rip command Ip ospf apply redistribute static command Default router ospf command Router ospf enable commandNo router ospf enable command Router ospf command Accept adv-rtr parameters Parameter Description No accept adv-rtr commandArea command No accept adv-rtr routeripaddress enable Area parameters No area commandArea command is executed in the Router Conﬁguration mode No area command is executed in the Router Conﬁguration mode As-boundary-router commandNo as-boundary-router command Default-cost ethernet command Default-cost ten-gig-ethernet command Default-cost fast-ethernet commandDefault-cost gig-ethernet command Following table describes the parameters of this command Host-route commandNo host-route command Redistribute routetype enable route-policy policyname Redistribute commandNo redistribute command Parameters for this command are listed below No router-id command Rfc1583-compatibility commandNo rfc1583-compatibility command Router-id command Area virtual-link command Trap commandNo trap command Word No area virtual-link command No area virtual-link A.B.C.D. W.X.Y.Z authentication- key Area virtual-link message-digest-key commandNo area virtual-link message-digest-key command Ip ospf advertise-when-down command Auto-vlink commandNo auto-vlink command Ip ospf cost command Ip ospf area commandIp ospf authentication-key command Ip ospf authentication-type command Ip ospf network command Ip ospf dead-interval commandIp ospf hello-interval command Ip ospf mtu-ignore command Ip ospf retransmit-interval command Ip ospf primary-md5-key commandIp ospf priority command Syntax of the ip ospf message-digest-keycommand is Ip ospf transmit-delay commandIp ospf message-digest-key command Ospf show commands Clear ip ospf counters command Command Description Clear ip ospf counters Clear ip ospf counters commandRoute policy commands Ip preﬁx-list command Route-map parameters Field Description Route-map commandIp preﬁx-list parameters Parameter Description Ip rip out-policy rmapname Ip rip in-policy rmapname Router vrrp command Virtual Router Redundancy Protocol Vrrp commandsRouter vrrp enable command No router vrrp enable command Ip vrrp address command No ping-virtual-address enable commandSend-trap enable command No send-trap enable command Ip vrrp adver-int command No ip vrrp address commandIp vrrp action command No ip vrrp critical-ip command Ip vrrp backup-master commandNo ip vrrp backup-master command Ip vrrp critical-ip command Ip vrrp fast-adv command Ip vrrp critical-ip-addr commandIp vrrp enable command No ip vrrp enable command Ip vrrp holddown-timer command No ip vrrp fast-adv commandIp vrrp fast-adv-int command Rip maximum-path command Ip vrrp priority commandShow ip vrrp command Equal Cost MultiPath Ecmp commands Show ecmp command Ospf maximum-path commandMaximum-path command No brouter port brouterport routing enable Brouter port commandsBrouter command No brouter command Show brouter command is executed in the User Exec mode Show brouter commandUDP broadcast forwarding commands Ip forward-protocol udp command Clear ip forward-protocol udp counters Clear ip forward-protocol udp counters commandIp forward-iprotocol udp command interface mode Where the parameter 1-4094 speciﬁes the Vlan ID To set DHCP, perform the following procedure Dhcp relay commandsIp dhcp-relay command No ip dhcp-relay command Syntax for the show ip dhcp-relayfwd-pathcommand is Show ip dhcp-relay counters commandShow ip dhcp-relay fwd-path command Ip dhcp-relay fwd-path command Dhcp feature is enabled by default Ip dhcp-relay fwd-path enable commandIp dhcp-relay fwd-path disable command Syntax for the ip dhcp-relayfwd-path enable command is No ip dhcp-relay fwd-path A.B.C.D O.P.Q.R No ip dhcp-relay fwd-path commandShow vlan dhcp-relay command Dhcp relay feature is enabled by default Ip dhcp-relay parameters Parameter Description Ip dhcp-relay broadcast commandIp dhcp-relay min-sec 0-65535 mode bootp dhcp bootpdhcp Ip dhcp-relay broadcast No ip dhcp-relay broadcast commandAddress Resolution Protocol ARP conﬁguration Syntax for the no ip dhcp-relay broadcast command is This section contains the following topics Changing the default ARP aging timeAdding a static ARP entry to a Vlan RIP conﬁguration tasks Adding a static ARP entry to a brouter portDeleting a static ARP entry Routing Information Protocol RIP conﬁguration Conﬁgure the interface, assign an IP address and add ports Enable RIPDisable Supply RIP Updates, if required Disable Listen for RIP Updates, if required Enable poison reverse Enable Triggered Updates, if required10 Conﬁgure send mode parameters 11 Conﬁgure receive mode parameters RIP conﬁguration example Conﬁguring RIP Assign the IP address 10.1.30.2/24 to Vlan Assign the IP address 10.1.20.2/24 to Vlan 5530-24TFDconfig-if#ip rip listen disable Enable RIP on the interfaceEnable IP routing and RIP globally Conﬁguring RIP version RIPv2 conﬁguration example Using RIP accept policies Accept policy conﬁguration Add the route policy created in to both RIP core ports Using RIP announce policies Conﬁgure the IP preﬁx list named Preﬁx2 with the IP address Ospf interface example topology 5530-24TFDconfig# route-map rippol2 1 match network Prefix2Open Shortest Path First Ospf conﬁguration Conﬁguring an IP Ospf interface Ospf security IP Routing Conﬁguration and Management MD5 conﬁguration example Conﬁgure MD5 authentication on R1Conﬁgure MD5 authentication on R2 Conﬁguring Ospf network types Ospf network example Conﬁguring Ospf areas Ospf normal area 5530-24TFDconfig-router# as-boundary-router enable Ospf stub area Ospf stub area example Enable Ospf on R1 End Nssa conﬁguration example Enable RIP globally and conﬁgure the RIP version 2 interface Apply the RipDist route policy to RIP Out Policy ABR conﬁguration example Conﬁguring Area Border Routers ABR End 0.2 172.3.0.0/16 Summary Link Summarize 100 Conﬁguring Autonomous System Border Routers AsbrArea ID Range Subnet/Mask Range Type Asbr distribution example Conﬁgure the RIP interface for RIP version 2 mode only 5530-24TFDconfig# ip prefix-list default 0.0.0.0/0 Controlling Nssa external route advertisements External route advertisement example Enable Ospf Apply route policy to RIP Out Policy Multi-area complex example Conﬁguring a multi-area complex IP Routing Conﬁguration and Management IP routing conﬁguration examples IP Routing Conﬁguration and Management R2 conﬁguration commands IP Routing Conﬁguration and Management IP routing conﬁguration examples STP Phase R3 conﬁguration commands IP routing conﬁguration examples IP Routing Conﬁguration and Management IP routing conﬁguration examples IP Routing Conﬁguration and Management IP routing conﬁguration examples IP Routing Conﬁguration and Management R4 conﬁguration commands IP Routing Conﬁguration and Management IP routing conﬁguration examples R5 conﬁguration commands IP routing conﬁguration examples IP Routing Conﬁguration and Management Show ip ospf Router R1 Status show vlanShow vlan ip Show ip ospf neighbor Show ip ospf area Router R2 Status show vlan Show ip route 100 10100 10.1.1.17 255.255.255.252 IfIndex Address Mask MacAddress10001 203.203.100.53 255.255.255.0 Show ip ospf interface Router R3 Status Show vlan Show ip rip interface Show ip rip Type Allow True Show route-map detailShow ip ospf redistribute 172.1.1.1 203.203.100.52 IP Address Holddown IP routing conﬁguration examples Nbr Router ID Nbr IP Address Pri State RetransQLen Perm Router R4 Status Show vlan IP Routing Conﬁguration and Management Router R5 Status Port Members 1000 Vlan #1000 Port None 0x0000 Yes Yes Port Members 100 Vlan #100 Port None 0x0000 IP routing conﬁguration examples Diagnosing neighbor state problems Accessed by using the show ip ospf neighbor command Virtual Router Redundancy Protocol Vrrp conﬁguration Vrrp example topology Conﬁguring normal Vrrp operation Conﬁgure an Ospf interface for Vlan Conﬁgure Vlan 2 on router R1 Create Vlan 2 on router R1Conﬁgure the ports for Vlan 2 on R1 Conﬁgure Vlan 2 on router R2 Create Vlan 2 on router R2 Conﬁgure the ports for Vlan 3 on R1 Conﬁgure Vlan 3 on router R2 Conﬁgure the ports for Vlan 2 on R2 End Vlan Conﬁguration for Router R2 Conﬁguring Vrrp with Smlt Conﬁgure the IST and add the IST to Vlan 5530-24TFD# config terminal 5530-24TFDconfig# interface mltConﬁgure the IST Vlan on R1 Conﬁgure IST Vlan 3999 on R1 Conﬁgure IST MLT on R1 Create Smlt on R1 Enable Ospf interface on Vlan 2 of R15530-24TFDconfig-if# ist enable peer-ip 2.1.1.2 vlan Create IP address for Vlan Create an IP address for Vlan Enable Ospf interface for Vlan 2 on R2Conﬁgure IST MLT on R2 Conﬁgure an IST peer for R2 and add the IST to Vlan Conﬁgure Vrrp VIP address for Vlan 2 on R2 Conﬁguration for R2 Vrrp with SLT conﬁguration Mlt spanning-tree 2 stp all learning disableConﬁguring Vrrp with SLT Conﬁguration for R2 Ecmpindex = R2 % ecmpcount + R1 = CRC32 SIP, DIPR2 = R1 & 0x1FThe Least Signiﬁcant 5 bits are selected Ecmp conﬁguration example 5530-24TFDconfig#ospf maximum-pathDisplaying the IP routing table 5530-24TFD# show ecmp Protocol MAX-PATH Static1 Rip2 Ospf4 Displaying global Ecmp conﬁguration IP dialog Globals tab Creating a Layer 3 routable Vlan Insert IP Address screen Following table describes the IP Address tab ﬁeldsIP Vlan screen IP Address tab ﬁelds Field Description IP screen IP routingGlobals tab Click Insert Addresses tab Addresses tabGlobals tab ﬁelds Field Description IP dialog- Routes tab Routes tabAddresses tab ﬁelds Field Description Routes tab ﬁelds Field Description Filtering route information Filter dialog ﬁelds Field Description Static Routes tab Static Routes tabClick Filter Tab will now be ﬁltered on the criteria speciﬁed ARP tab ARP tabInsert Static Route ﬁelds Field Description Insert ARP Entry ﬁelds Field Description ARP Interfaces tabClick Insert. The ARP tab is displayed with the new entry Insert ARP Entry screen ARP Inspection-VLAN tab ARP Inspection Vlan tabIP screen ARP Interfaces tab ARP Interfaces tab ﬁelds Field Description ARP Inspection-port tab ARP Inspection port tab TCP tab ﬁelds Field Description TCP tabTCP tab TCP Connections tab ﬁelds Field Description TCP Connections tabUDP Listeners tab TCP Connections tab UDP Listeners tab ﬁelds Field Description Ecmp tabUDP Listeners tab Ecmp tab ﬁelds Field Description Global RIP conﬁgurationIP dialog Ecmp tab RIP dialog Globals tab Interface tab ﬁelds Field Description RIP interface conﬁgurationRIP dialog Interface tab Interface Advance tab ﬁelds Field Description Advanced RIP interface conﬁgurationRIP dialog Interface Advance tab Stats tab RIP Statistics RIP Stats Graph dialog Vlan RIP conﬁgurationStats tab ﬁelds Field Description RIP tab ﬁelds Field Description IP Vlan screen RIP tab General tab ﬁelds Field Description Global Ospf conﬁgurationOspf dialog General tab Field Description Ospf dialog Areas tab Ospf area conﬁguration Areas tab ﬁelds Field Description Deleting an Ospf area To delete an Ospf area, use the following procedureOspf area creation Ospf area deletion Stub Area Metrics tab ﬁelds Stub Area Metrics conﬁgurationOspf dialog Stub Area Metrics tab Interfaces tab ﬁelds Field Description Interface conﬁgurationOspf dialog Interfaces tab Field Description Ospf dialog If Metrics tab Interface Metric conﬁguration Ospf dialog Neighbors tab Neighbor informationIf Metrics tab ﬁelds Field Description Neighbor tab ﬁelds Field Description Click Refresh to update the informationVirtual interface information Virtual Interface ﬁelds Field Description Virtual If tab Creating an Ospf virtual interface Step Action Virtual interface creation Insert virtual interface dialog Click Insert. The OSPF, Insert Virtual If dialog opensEnter the information in the ﬁelds on the Virtual If window Virtual interface tab Creating an automatic Virtual Link Step Action Virtual interface deletionAutomatic Virtual Link creation Deleting an Ospf virtual interface Step Action Virtual neighbors information Check the AutoVirtLinkEnable boxDeselect the AutoVirtLinkEnable box Automatic Virtual Link Deletion Virtual Neighbors tab ﬁelds Field Description Virtual Neighbors tab Hosts tab To create an Ospf host, use the following procedureOspf Hosts information Ospf Host creation Deleting an Ospf host Step Action To delete an Ospf host, use the following procedureOspf Host deletion Creating an Ospf host Step Action Link State Database ﬁelds Field Description Link State Database informationOspf dialog Link State Database tab Ext. Link State Database ﬁelds Field External Link State Database informationOspf dialog Ext. Link State Database tab Area Aggregate conﬁguration Area Aggregate tab ﬁelds Field Description Ospf dialog Area Aggregate tab Insert Area Aggregate dialog ﬁelds Field Description To create a new Ospf area aggregate, follow this procedureArea Aggregate creation Insert Area Aggregate dialog Deleting an Ospf area aggregate Step Action Area Aggregate deletionOspf redistribution conﬁguration Redistribute tab ﬁelds Field Description To create a new redistribution entry, follow this procedureRedistribution creation Ospf dialog Redistribute tab Insert Redistribute dialog ﬁelds Field Description Redistribution deletionInsert Redistribute dialog Message Digest tab ﬁelds Field Description Message Digest informationDeleting a redistribution entry Step Action Ospf dialog Message Digest tab Insert Message Digest dialog ﬁelds Field Description Click Refresh to update the displayed informationMessage Digest creation Insert Message Digest dialog Virtual If Message Digest tab Message Digest deletionVirtual If Message Digest information Deleting an Ospf message digest entry Step Action Virtual If Message Digest ﬁelds Field Description Virtual If Message Digest creationCreating a Virtual If Message Digest entry Step Action Deleting a Virtual If Message Digest entry Step Action Virtual If Message Digest deletionOspf statistics Enter the information in the ﬁelds provided Click Insert Ospf Ospf dialog Stats tab Vlan Ospf statistics Ospf Stats tab ﬁelds Field Description Ospf Stats tab Preﬁx List conﬁguration Preﬁx List tab ﬁelds Field Description To create a new preﬁx list, follow this procedurePreﬁx List creation Policy dialog Preﬁx List tab Insert Preﬁx List dialog To delete a preﬁx list, use the following procedurePreﬁx List deletion Deleting a Preﬁx List Step Action Route Policy tab ﬁelds Field Description Route Policy conﬁgurationPolicy dialog Route Policy tab IP Routing Conﬁguration and Management Route Policy creation To create a new route policy, follow this procedure Insert Route Policy ﬁelds Field Description Insert Route Policy dialog IP routing conﬁguration using the Java Device Manager Deleting a route policy Step Action To delete a route policy, use the following procedureRoute policy deletion Applying Policy tab ﬁelds Field Description Applying Ospf policiesOspf Accept Policy conﬁguration Policy dialog Applying Policy tab Ospf Accept tab ﬁelds Field Description To create a new Ospf accept policy, follow this procedureOspf Accept Policy creation Policy dialog Ospf Accept tab Insert Ospf Accept ﬁelds Field Description Ospf Accept Policy deletionDeleting an Ospf accept policy Step Action Insert Ospf Accept dialog RIP In/Out Policy tab ﬁelds Field Description RIP In and Out Policy conﬁgurationPolicy dialog RIP In/Out Policy tab Vrrp dialog Globals tab Global Vrrp conﬁguration Vrrp dialog Interface Address tab Vrrp interface creation Insert Interface Address dialog To delete a Vrrp interface, use the following procedureVrrp Interface deletion Deleting a Vrrp interface Step Action Vrrp dialog Interfaces tab Vrrp interface management IP routing conﬁguration using the Java Device Manager Vrrp Stats dialog Graphing Vrrp interface information Type ﬁeld Viewing general Vrrp statisticsVrrp Stats ﬁelds Field Description Vrrp dialog Stats tab Select a port on the Device Manager Front Panel view Ecmp conﬁgurationConﬁguration and management of Brouter ports Port dialog IP Address tab To create a new brouter port, use the following procedureCreating a Brouter port Insert IP Address dialog ﬁelds Field Description To delete a brouter port, use the following procedureDeleting a Brouter port Insert IP Address dialog Insert Protocols dialog UDP protocol conﬁgurationUDP Forward dialog Protocols tab UDP Forward dialog Forwardings tab UDP forwarding conﬁgurationInsert Protocols dialog ﬁelds Field Description Insert Forwardings dialog ﬁelds Field Description UDP forwarding deletionDeleting a UDP forwarding Step Action Insert Forwardings dialog Forwarding Lists tab ﬁelds Field Description UDP forwarding list conﬁgurationUDP forwarding list creation UDP Forward dialog Forwarding Lists tab Insert Forwarding Lists dialog UDP forwarding list deletionDeleting a UDP forwarding list Step Action Select the Forwarding Lists tab Broadcast Interface tab ﬁelds Field Description Conﬁguring UDP broadcast interfacesSelect an Id to delete Click Delete UDP Forward dialog Broadcast Interfaces tab Insert Broadcast Interfaces dialog UDP broadcast interface creation Insert Broadcast Interfaces dialog ﬁelds Field Description UDP broadcast interface deletionDeleting a UDP broadcast interface Dhcp conﬁguration Insert Dhcp Relay To conﬁgure a Dhcp entry, use the following procedureCreating a Dhcp entry Step Action Dhcp Relay tab Dhcp Snooping Vlan To delete a Dhcp entry, use the following procedureTo enable Dhcp Snooping, use the following procedure Dhcp Snooping Dhcp Snooping-VLAN tab Dhcp Snooping port Dhcp Snooping-port tab Dhcp bindings Dhcp Bindings IP Source Guard port IP Source Guard-addresses tab IP Source Guard addressesIP Source Guard-port tab Dhcp tab ﬁelds Fields Description Vlan Dhcp conﬁgurationFollowing table describes the Dhcp tab ﬁelds Dhcp tab ﬁelds Fields Description Make changes as necessary in the ﬁelds provided Click Apply IP Routing Conﬁguration and Management Vlan Snoop tab Conﬁguring Igmp snooping using the Java Device Manager Vlan Snoop tab ﬁelds Field Description Enabling Igmp Snooping for a Vlan 308 Conﬁguring Igmp snooping using the Java Device Manager Igmp Conﬁguration screen Conﬁguring Igmp using Web-based management Igmp Vlan Conﬁguration screen Igmp Vlan Setting ﬁelds Field Description Conﬁguring Igmp using the Web-based Management Interface Igmp Multicast Group Membership window Vlan Conﬁguration screen reopens and the settings are savedClick Submit Multicast Group Index Ospf Non-local static routes Index Page Conﬁguration-IP Routing Protocols

Nortel Networks NN47200-503 manual Ospf Accept Policy deletion, Insert Ospf Accept dialog

Models: NN47200-503