Nortel Networks NN47200-503 Default-cost fast-ethernet command, Default-cost gig-ethernet command

88IP Routing Configuration and Management

The <metric_value> parameter represents the cost value to assign to the port. This value is an integer between 1 and 65535.

The default-cost ethernet command is executed in the Router Configuration mode.

default-cost fast-ethernet command

The default-costfast-ethernetcommand is used to define the default cost metric of a fast ethernet (100 Mbps) port.

The syntax of the default-costfast-ethernetcommand is:

default-cost fast-ethernet <metric_value>

The <metric_value> parameter represents the cost value to assign to the port. This value is an integer between 1 and 65535.

The default-costfast-ethernetcommand is executed in the Router Configuration mode.

default-cost gig-ethernet command

The default-costgig-ethernetcommand is used to define the default cost metric of a gig ethernet (1000 Mbps) port.

The syntax of the default-costgig-ethernetcommand is:

default-cost gig-ethernet <metric_value>

The <metric_value> parameter represents the cost value to assign to the port. This value is an integer between 1 and 65535.

The default-costgig-ethernetcommand is executed in the Router Configuration mode.

default-cost ten-gig-ethernet command

The default-cost ten-gig-ethernet command is used to define the default cost metric of a ten gig ethernet (10000 Mbps) port.

The syntax of the default-cost ten-gig-ethernet command is:

default-cost ten-gig-ethernet <metric_value>

The <metric_value> parameter represents the cost value to assign to the port. This value is an integer between 1 and 65535.

The default-cost ten-gig-ethernet command is executed in the Router Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks