Nortel Networks NN47200-503 manual Rfc1583-compatibility command, No rfc1583-compatibility command

	IP routing configuration using the CLI 91
no redistribute parameters
Parameters	Description
<route_type>	The type of route to be configured. Valid options are
	direct, rip, and static.
<policy_name>	The route policy to remove from the route redistribution.
	This is the name of an existing route policy.

The no redistribute command is executed in the Router Configuration mode.

rfc1583-compatibility command

The rfc1583-compatibilitycommand is used to enable compatibility for RFC 1583 in the switch OSPF implementation.

The syntax of the rfc1583-compatibilitycommand is:

rfc1583-compatibility enable

The rfc1583-compatibilitycommand is executed in the Router Configuration mode.

no rfc1583-compatibility command

The no rfc1583-compatibilitycommand is used to disable compatibility for RFC 1583 in the switch OSPF implementation.

The syntax of the no rfc1583-compatibilitycommand is:

no rfc1583-compatibility enable

The no rfc1583-compatibilitycommand is executed in the Router Configuration mode.

router-id command

The router-idcommand is used to set the identifier to the user-configured router ID, which is expressed in the form of an IP address.

The syntax of the router-idcommand is:

router-id <router_id>

The <router_id> parameter is used as the unique identifier for the router.

The router-idcommand is executed in the Router Configuration mode.

no router-id command

The no router-idcommand is used to reset the router ID to 0.0.0.0.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks