IP routing configuration using the CLI 111

The <path_count> parameter represents the number of ECMP paths allotted. This is a value between 1 and 4. The default is 1.

The rip maximum-pathcommand is executed in the Global Configuration mode.

ospf maximum-path command

The ospf maximum-pathcommand is used to configure the number of ECMP paths allotted for the Open Shortest Path First (OSPF) protocol.

The syntax of the ospf maximum-pathcommand is:

ospf maximum-path <path_count>

The <path_count> parameter represents the number of ECMP paths allotted. This is a value between 1 and 4. The default is 1.

The ospf maximum-pathcommand is executed in the Global Configuration mode.

maximum-path command

The maximum-pathcommand is used to configure the number of ECMP paths allotted to static routes.

The syntax of the maximum-pathcommand is:

maximum-path <path_count>

The <path_count> parameter represents the number of ECMP paths allotted. This is a value between 1 and 4. The default is 1.

The maximum-pathcommand is executed in the Global Configuration mode.

show ecmp command

The show ecmp command is used to display ECMP path information.

The syntax of the show ecmp command is:

show ecmp

The show ecmp command is executed in the User EXEC Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 111
Image 111
Nortel Networks NN47200-503 manual Ospf maximum-path command, Maximum-path command, Show ecmp command