Nortel Networks NN47200-503 manual Ip dhcp-relay fwd-path enable command

	IP routing configuration using the CLI 117
ip dhcp-relay fwd-path parameters
Parameter	Description
<A.B.C.D>	Enter the IP address of the DHCP agent on the
	forwarding path to be configured.
<O.P.Q.R>	Enter the IP address of the DHCP server on the
	forwarding path to be configured.

The ip dhcp-relayfwd-pathcommand is executed in the Global Configuration command mode.

The DHCP relay feature is enabled by default, and the default mode is BootP-DHCP.

ip dhcp-relay fwd-path enable command

The ip dhcp-relay fwd-path enable command enables the specific DHCP forwarding path globally on the Nortel Ethernet Routing Switch 5500 Series.

The syntax for the ip dhcp-relayfwd-path enable command is:

ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R> enable

The following table describes the parameters for this command.

ip dhcp-relay fwd-path enable parameters

Parameter	Description
<A.B.C.D>	Enter the IP address of the DHCP agent on the
	forwarding path to be enabled.
<O.P.Q.R>	Enter the IP address of the DHCP server on the
	forwarding path to be enabled.

The ip dhcp-relay fwd-path enable command is executed in the Global Configuration command mode.

The DHCP feature is enabled by default.

ip dhcp-relay fwd-path disable command

The ip dhcp-relay fwd-path disable command disables the specific DHCP forwarding path globally on the Nortel Ethernet Routing Switch 5500 Series.

The syntax for the ip dhcp-relay fwd-path disable command is:

ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R> disable

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks