Furuno NX-300 manual Time Display, Default Setting

3.3 Time Display

When navigational data is fed to the NX-300, you may display the time in 12-hour or 24-hour notation. The default setting is 24-hour notation. AM or PM is shown when 12-hour notation is selected.

1.Press the [MENU] key to open the main menu.

2.Press ! or " to select SYSTEM MENU.

3.Press the [ENT] key. The SYSTEM MENU appears.

4.Press " to select TIME DISP.

5.Press the [ENT] key. The following window appears.

Figure 3-4 TIME DISP window

6.Press ! or " to select 12HOUR or 24HOUR as appropriate.

7.Press the [ENT] key.

8.Press the [MENU] key or [DISP] key to close the SYSTEM MENU.

3.4Default Setting

This function restores all default settings.

1.Press the [MENU] key to open the main menu.

2.Press ! or " to select SYSTEM MENU.

3.Press the [ENT] key to show the SYSTEM MENU.

4.Press " to select DEFAULT SETTING.

5.Press the [ENT] key. The following window appears.

Figure 3-5 DEFAULT SETTING window

6.Press # to select YES. If you want to cancel, press the [ENT] key to select NO before pressing #.

7.Press the [ENT] key.

8.Press the [MENU] key or [DISP] key to close the SYSTEM MENU.

3-3