Setting for communication software on PC

Baud Rate:

4800 bps

Character Length:

8 bit

Stop Bit:

1 bit

Parity:

None

X Control:

XON/XOFF

Downloading messages to a PC

Set up the computer to receive data. Messages are downloaded to a PC character by character during reception.

To download all messages saved in NX-300, do the following;

1.Press the [MENU] key to open the main menu.

2.Press ! or " to select FUNCTIONS.

3.Press the [ENT] key to show the FUNCTIONS menu.

4.Press " to select SAVE MESSAGE TO PC.

5.Press the [ENT] key. The following display appears.

Figure 2-17 SAVE MESSAGE TO PC display

6.Press the [ENT] key.

Figure 2-18 SAVING START window

7.Set up the computer to receive data.

8.Press # to select YES and press the [ENT] key.

2-7

Page 29
Image 29
Furuno NX-300 manual Downloading messages to a PC