Nortel Networks NN47200-503 manual Field Description

236 IP Routing Configuration and Management

Field	Description
RtrPriority	The priority of the interface. Used in
	multi-access networks, this field is used in
	the designated router election algorithm.
	The value 0 signifies that the router is not
	eligible to become the designated router
	on this network. In the event of a tie in this
	value, routers will use their Router ID as a tie
	breaker. This is an integer value between 0
	and 255.
DesignatedRouter	The IP address of the Designated Router.
BackupDesignatedRouter	The IP address of the Backup Designated
	Router.
Type	The OSPF interface type. The options
	available are: broadcast or passive.
AuthType	The interface authentication type. The
	options available are: none, simplePassword,
	or md5.
AuthKey	The interface authentication key. This key is
	for when AuthType is simplePassword.
PrimaryMd5Key	The MD5 primary key if it exists. Otherwise
	this field will display 0.
HelloInterval	The interval in seconds between the Hello
	packets sent by the router on this interface.
	This value must be the same for all routers
	attached to a common network. This is an
	integer value between 1 and 65535.
TransitDelay	The estimated number of seconds it takes to
	transmit a link state update packet over this
	interface. This is an integer value between
	0 and 3600.
RetransInterval	The number of seconds between link
	state advertisement retransmissions for
	adjacencies belonging to this interface.
	This value is also used when retransmitting
	database description and link state request
	packets. This is an integer value between
	0 and 3600.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks