Nortel Networks NN47200-503 manual Deleting a Brouter port, Insert IP Address dialog

IP routing configuration using the Java Device Manager 287

2Select Edit > Port from the Device Manager menu. The Port dialog opens with the Interface tab selected. Select the IP Address tab. This tab is illustrated above.

3Click Insert.

4The Insert IP Address dialog opens. This dialog is illustrated below.

Insert IP Address dialog

5Using the provided fields, create the new brouter port. These fields are outlined in the following table.

Insert IP Address dialog fields

Field	Description
IpAddress	The IP address assigned to this brouter.
NetMask	The subnet mask associated with the brouter
	IP address.
VlanId	The VLAN ID associated with this brouter port.
MacOffset	The MAC address offset associated with this
	brouter port.

6Click Insert.

—End—

Note: Brouter ports are treated as routable VLANs and are displayed on the Basic tab of the VLANs screen.

Deleting a Brouter port

To delete a brouter port, use the following procedure:

Step Action

1Select a port on the Device Manager Front Panel view.

2Select Edit > Port from the Device Manager menu. The Port dialog opens with the Interface tab selected. Select the IP Address tab.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks