IP routing configuration using the CLI 109

The <vr_id> parameter represents the virtual router being configured.

The ip vrrp fast-advcommand is executed in the Interface Configuration mode.

no ip vrrp fast-adv command

The no ip vrrp fast-advcommand is used to disable the VRRP fast advertisement functionality.

The syntax of the no ip vrrp fast-advcommand is:

no ip vrrp <vr_id> fast-adv enable

The <vr_id> parameter represents the virtual router being configured.

The no ip vrrp fast-advcommand is executed in the Interface Configuration mode.

ip vrrp fast-adv-int command

The ip vrrp fast-adv-intcommand is used to set the interval used in the VRRP fast advertisement functionality.

The syntax of the ip vrrp fast-adv-intcommand is:

ip vrrp <vr_id> fast-adv-int <interval>

The <vr_id> parameter represents the virtual router being configured. The <interval> parameter represents the fast advertisement interval. This is a value in milliseconds between 200 and 1000.

The ip vrrp fast-adv-intcommand is executed in the Interface Configuration mode.

ip vrrp holddown-timer command

The ip vrrp holddown-timercommand is used to set the VRRP holddown timer.

The syntax of the ip vrrp holddown timer command is:

ip vrrp <vr_id> holddown-timer <timer_value>

The <vr_id> parameter represents the virtual router being configured. The <timer_value> parameter represents the holddown timer value. This is a value in seconds between 0 and 21600.

The ip vrrp holddown-timercommand is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 109
Image 109
Nortel Networks NN47200-503 No ip vrrp fast-adv command, Ip vrrp fast-adv-int command, Ip vrrp holddown-timer command