Nortel Networks NN47200-503 manual Insert Route Policy dialog

270IP Routing Configuration and Management

Insert Route Policy dialog

4Using the fields provided, create the new route policy. These fields are described in the following table.

Insert Route Policy fields

Field	Description
Id	The index value used to uniquely identify a
	group of policies.
SequenceNumber	The secondary index value assigned to
	individual policies inside a larger policy group.
Name	The name associated with this policy.
Enable	Indicates whether the policy is enabled.
	Disabled policies should be used for routing.
Mode	Specifies the action to be taken when this
	policy is selected for a specific route. A value
	of permit indicates that the route will be used
	while deny indicates that the route will be
	ignored.
MatchProtocol	Select the appropriate protocol (RIP, Static,
	Direct, OSPF or Any). If configured, matches
	the protocol through which the route is
	learned. This field is used only for RIP
	announce purposes.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks