108IP Routing Configuration and Management

The no ip vrrp critical-ipcommand is executed in the Interface Configuration mode.

ip vrrp critical-ip-addr command

The ip vrrp critical-ip-addrcommand is used to set the IP address used with the VRRP critical IP functionality.

The syntax of the ip vrrp critical-ip-addrcommand is:

ip vrrp <vr_id> critical-ip-addr <ip_address>

The <vr_id> parameter represents the virtual router being configured. The <ip_address> parameter represents the IP address to be used.

The ip vrrp critical-ip-addrcommand is executed in the Interface Configuration mode.

ip vrrp enable command

The ip vrrp enable command is used to enable the virtual router.

The syntax of the ip vrrp enable command is:

ip vrrp <vr_id> enable

The <vr_id> parameter represents the virtual router being configured.

The ip vrrp enable command is executed in the Interface Configuration mode.

no ip vrrp enable command

The no ip vrrp enable command is used to disable the virtual router. The syntax of the no ip vrrp enable command is:

no ip vrrp <vr_id> enable

The <vr_id> parameter represents the virtual router being configured.

The no ip vrrp enable command is executed in the Interface

Configuration mode.

ip vrrp fast-adv command

The ip vrrp fast-advcommand is used to enable the VRRP fast advertisement functionality.

The syntax of the ip vrrp fast-advcommand is:

ip vrrp <vr_id> fast-adv enable

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 108
Image 108
Nortel Networks NN47200-503 manual Ip vrrp critical-ip-addr command, Ip vrrp enable command, No ip vrrp enable command