IP routing configuration using the CLI 73

ip rip listen {enable}

The ip rip listen command is executed in the Interface Configuration mode.

no ip rip listen command

The no ip rip listen command is used to prevent this interface from listening for RIP advertisements.

The syntax of the no ip rip listen command is:

ip rip listen {enable}

The no ip rip listen command is executed in the Interface Configuration mode.

ip rip out-policy command

The ip rip out-policycommand is used to add an out policy to this RIP interface.

The syntax of the ip rip out-policycommand is:

ip rip out-policy <policy_name>

The <policy_name> parameter represents the name of a previously configured switch policy.

The ip rip out-policycommand is executed in the Interface Configuration mode.

no ip rip out-policy command

The no ip rip out-policycommand is used to remove an out policy from the RIP interface.

The syntax of the no ip rip out-policycommand is:

no ip rip out-policy <policy_name>

The <policy_name> parameter represents the name of a previously configured switch policy.

The no ip rip out-policycommand is executed in the Interface Configuration mode.

ip rip poison command

The ip rip poison command is used to enable poison reverse on this RIP interface.

The syntax of the ip rip poison command is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 73
Image 73
Nortel Networks NN47200-503 manual No ip rip listen command, Ip rip out-policy command, No ip rip out-policy command