Nortel Networks NN47200-503 manual Ospf dialog Area Aggregate tab

IP routing configuration using the Java Device Manager 251

OSPF dialog - Area Aggregate tab

2Using the fields provided, configure the area aggregate information. These fields are described in the following table.

Area Aggregate tab fields

Field	Description
AreaID	The unique identifier of the Area this address
	aggregate is found in.
LsdbType	The type of address aggregate. This field specifies
	the link state database type that this address
	aggregate applies to. Select one of the following
	types: Summary Link, Aggregated Summary Link,
	nssaExternal link, or Not so Stubby Area Link.
IpAddress	The IP address of the network or subnetwork
	indicated by the aggregate range.
Mask	The subnet mask that pertains to the network or
	subnetwork.
Effect	This field indicates the aggregates effect. Subnets
	subsumed by aggregate ranges either trigger
	the advertisement of the indicated aggregate
	(advertiseMatching value) or result in the subnet
	not being advertised at all outside the area. Select
	one of the following types: AdvertiseMatching
	(Advertise the aggregate summary LSA with
	same LSID), DoNotAdvertiseMatching (Suppress
	all networks that fall within the entire range) or
	AdvertiseDoNotAggregate (Advertise individual
	networks).
AdvertiseMetric	The advertisement metric associated with this
	aggregate. Enter an integer value between 0 and
	65535 which represents the Metric cost value for
	the OSPF area range.

3Click Apply.

—End—

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks