Nortel Networks NN47200-503 manual No ip rip advertise-when-down command, Ip rip cost command

70IP Routing Configuration and Management

no ip rip advertise-when-down command

The ip rip advertise-when-downcommand is used to disable RIP advertisements on the interface being configured even when that interface is not operational.

The syntax of the no ip rip advertise-when-down command is:

no ip rip advertise-when-down {enable}

The no ip rip advertise-when-down command is executed in the Interface Configuration mode.

ip rip auto-aggregation command

The ip rip auto-aggregationcommand is used to enable auto aggregation on the RIP interface. This allows for the automatic aggregation of routes to their natural net mask when they are advertised on an interface in a different class network.

The syntax of the ip rip auto-aggregationcommand is:

ip rip auto-aggregation {enable}

Auto aggregation is disabled by default.

The ip rip auto-aggregationcommand is executed in the Interface Configuration mode.

no ip rip auto-aggregation command

The no ip rip auto-aggregation command is used to disable auto-aggregation on the RIP interface.

The syntax of the no ip rip auto-aggregationcommand is:

no ip rip auto-aggregation {enable}

The no ip rip auto-aggregationcommand is executed in the

Interface Configuration mode.

ip rip cost command

The ip rip cost command is used to set the administrative path cost of the interface.

The syntax of the ip rip cost command is:

ip rip cost <path_cost>

The <path_cost> parameter represents a value between 1 and 15.

The default path cost is 1.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks