Cabletron Systems W85 Special Commands, done, quit, exit, Description, Options, Example, Syntax

Chapter 4: Management

Example:

->ds1ext

DS1 Extensions Configuration:

		Channel	Line
Line	CRC	Line Code	Build Out
29	16	none	0 db
30	16	none	0 db
31	16	none	0 db
32	16	none	0 db
33	16	none	0 db
34	16	none	0 db
35	32	jBZS	0 db
36	16	none	0 db
->

2689_8

4.2.3Special Commands

done, quit, exit

Syntax:	done
	quit
	exit
Description:	The done, exit, or quit command enables the user to exit
	from Network Tools and return to the Main Menu screen.
	All three commands perform the same function.
Options:	Not Applicable
Example:	Screen returns to previous menu.

To find the MIB II interface indexes assigned to the ds1

TIP channels used in the IMUX group, utilize the dsx1 and ds1alarm commands. With the dsx1 command, the interface numbers are in the column under “line” in the display. When the ds1alarm command is used, the interface numbers, as well as the HSIM ID and the ds1 index, can be seen for verification.

Also, in the Interface Statistics screen, as the Interfaces are incremented, the Name of the interface can be seen, and then used to correlate with the number to identify it.

4-14 HSIM-W85 User’s Guide