Manuals / Cabletron Systems / Computer Equipment / Network Card

Cabletron Systems manual Appendix A Specifications, Physical Properties, HSIM-W85 User’s Guide

Models: W85

1 60

Download 60 pages 41.11 Kb

Page 53

APPENDIX A

SPECIFICATIONS

This chapter lists the speciﬁcations and regulatory requirements for the HSIM-W85. Cabletron Systems reserves the right to change these speciﬁcations at any time without notice.

A.1		PHYSICAL PROPERTIES

	WAN Interface		8 DS1 ports

	Physical Interface		RJ45 connectors

	Cable Type		Twisted pair

			The maximum link distance can be
			greater than 5000 ft (1524 m). The
			length of the jumper cable from the
			HSIM-W85 to the wall jack is
	Maximum Link Distance		included in the total distance. The
	Maximum Link Distance		total length of the cable from the
			total length of the cable from the
			HSIM-W85 to the ﬁrst T1 repeater
			must not exceed dB loss of -36
			including the jumper cable and all
			connectors.

	T1 Cable Part Number		9372094 -10 ft (feet)
	T1 Cable Part Number		9372094 -xx (meters)
			9372094 -xx (meters)

	Microprocessor		i960HD66

	Power Supply		+5V supplied by host device

	Power Consumption		17.5 Watts maximum

	Memory		8 MB of DRAM Local memory
	Memory		4 MB of DRAM Shared memory
			4 MB of DRAM Shared memory

	Dimensions		4.8H x 20.6W x 28.7D (cm)
	Dimensions		1.9H x 8.1W x 11.3D (in)
			1.9H x 8.1W x 11.3D (in)

	Weight		0.45 kg (1.0 lb)

	MTBF (Predicted)		200,000 hours

HSIM-W85 User’s Guide

A-1

Image 53

Cabletron Systems manual Appendix A Specifications, Physical Properties, HSIM-W85 User’s Guide

Contents

HSIM-W85 HSIM-W85 User’s Guide9032842-01 Page HSIM-W85 User’s Guide Only qualiﬁed personnel should perform installation proceduresHSIM-W85 User’s Guide FCC NOTICEINDUSTRY CANADA NOTICE CABLETRON SYSTEMS, INC PROGRAM LICENSE AGREEMENT VCCI NOTICEHSIM-W85 User’s Guide BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT4. EXPORT REQUIREMENTS. You understand that Cabletron and its Affiliates are subject to regulation by agencies of the U.S. Government, including the U.S. Department of Commerce, which prohibit export or diversion of certain technical products to certain countries, unless a license to export the product is obtained from the U.S. Government or an exception from obtaining such license may be relied upon by the exporting party HSIM-W85 User’s GuideHSIM-W85 User’s Guide CABLETRON SYSTEMS SALES AND SERVICE, INC PROGRAM LICENSE AGREEMENTBEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT CAREFULLY READ THIS LICENSE AGREEMENTHSIM-W85 User’s Guide CABLETRON SYSTEMS LIMITED PROGRAM LICENSE AGREEMENTBEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT CAREFULLY READ THIS LICENSE AGREEMENTHSIM-W85 User’s Guide HSIM-W85 User’s Guide viiiINSTALLATION CONTENTSCHAPTER INTRODUCTIONTROUBLESHOOTING ContentsSPECIFICATIONS APPENDIX B TYPICAL CONFIGURATION1.1 FIRMWARE REVISION Important Notice CHAPTER INTRODUCTIONChapter 1 Introduction 1.2 USING THIS MANUAL1.3 OVERVIEW 1.4 DATA FLOW IN THE HSIM-W85 1.5 FEATURES1.5.2 HDLC 1.5.1 Connectivity1.5.4 Priority Queuing 1.5.3 Inverse Multiplexing IMUX1.5.6 SNMP and MIB Support 1.5.5 DS1 Alarm1.5.7 LANVIEW Diagnostic LEDs The following conventions are used throughout this document 1.6 DOCUMENT CONVENTIONSChapter 1 Introduction bold type1.7 RELATED DOCUMENTATION 1.8 GETTING HELP 2.1 UNPACKING THE HSIM-W85 CHAPTER INSTALLATIONOnly qualiﬁed personnel should install or service this unit 2.2 INSTALLING THE HSIM-W852.2.1 Installing the HSIM-W85 in an Interface Module HSIM-W85 User’s Guide Installing the HSIM-W85Figure 2-1 Removing the HSIM Coverplate HSIM Coverplate Faceplate Mounting Screws Host Platform7. Align the connector on the HSIM-W85 with the pins on the module 2.2.2 Installing the HSIM-W85 in a Standalone Device Figure B-3 HSIM-W85 Cable Connection 2.3 CONNECTING THE HSIM-W85 TO THE NETWORKHSIM-W85 User’s Guide CHAPTER LANVIEW LEDs3.1 LANVIEW LEDS HSIM-W85 LEDs Chapter 3 LANVIEW LEDsHSIM-W85 User’s Guide 4.1 LOCAL MANAGEMENT CHAPTER MANAGEMENTChapter 4 Management Configuration MenuHSIM-W85 User’s Guide Figure 4-1 Typical Hierarchy of Local Management Screens4.2 NETWORK TOOLS Important Notice4.2.1 Commands There are two categories of commands in the command set command imux 4.2.2 Built-in CommandsExample Example wanpqSyntax ds1alarm ds1alarmExample dsx1Syntax Example Options dsx1 with no options lists a summary of the DS1 conﬁgurationSyntax ds1ext ds1extdone, quit, exit 4.2.3 Special CommandsDescription Options4.3 SAMPLE IMUX CONFIGURATION 4-16 Chapter 4 ManagementHSIM-W85 User’s Guide Figure 4-4 Enabling the IMUX Group4-17 Sample IMUX ConﬁgurationHSIM-W85 User’s Guide HSIM-W85 User’s Guide Chapter 4 Management4-18 5.1.1 Hardware Troubleshooting CHAPTER TROUBLESHOOTING5.1 TROUBLESHOOTING THE HSIM-W85 Verify the framing, zero suppression Device not forwarding packets 5.1.2 Investigating Software Conﬁguration Problems5.1.3 Problems with the Firmware Image HSIM-W85 User’s Guide Chapter 5 TroubleshootingHSIM-W85 User’s Guide APPENDIX A SPECIFICATIONSPHYSICAL PROPERTIES A.3 REGULATORY COMPLIANCE A.2 ENVIRONMENTAL REQUIREMENTSAppendix A Speciﬁcations HSIM-W85 User’s GuideAPPENDIX B TYPICAL CONFIGURATION configW85 T1 Configuration IMUX ConfigurationAppendix B Typical Conﬁguration HSIM-W85 User’s GuidePort ID APPENDIX C FCC PART 68 - USER’S INFORMATIONREN/SOC USOC7. The attached affidavit must be completed by the installer For the work to be performed in the certiﬁed territory of accordance with