Cabletron Systems W85 manual There are two categories of commands in the command set

Network Tools

Welcome to Network Tools

->help

Commands Available to the User:

Built in Commands:

arpbridge

netstat ping

showtraceroute

soft_reset	telnet
imux	ds1alarm
dsx1	ds1ext

defroute reset

link_trap wanpq stpStandby

SPECIAL:

done, quit, or exit - Exit from the Network Tools.

For help with a specific command, type 'help <command>'.

->

090829

Figure 4-2 Network Tools Help Screen

The Network Tools functions are performed using a series of commands. Entering commands in Network Tools involves typing the command at the Network Tools prompt, adding any required parameters, and pressing ENTER to execute the command.

There are two categories of commands in the command set:

•Built-in Commands – Allow the user to access and manage network devices. The commands for the HSIM-W85 are imux, ds1alarm, wanpq, dsx1, and ds1ext. The other commands listed in Figure 4-2are described in the host platform manual.

•Special Commands – Allow the user to exit from Network Tools. The commands are done, exit, and quit. All three commands perform the same function.

HSIM-W85 User’s Guide 4-5