Nortel Networks NN47200-503 manual RIP dialog Globals tab, Globals tab fields Field Description

IP routing configuration using the Java Device Manager 223

RIP dialog - Globals tab

2Using the fields provided, configure the global RIP parameters. The following table describes these parameters.

Globals tab fields

Field	Description
Operation	Enables or disables the operation of RIP on all
	interfaces. The default is disabled.
UpdateTime	The time interval between RIP updates on all
	interfaces. It is a global parameter for the box; that
	is, it applies to all interfaces and cannot be set
	individually for each interface. The default is 30
	seconds.
RouteChanges	The number of route changes made to the IP Route
	Database by RIP; does not include the refresh of
	a route’s age.
Queries	The number of responses sent to RIP queries from
	other systems.
HoldDownTime	Sets the length of time that RIP will continue
	to advertise a network after determining it is
	unreachable. The range is 0 to 360 seconds. The
	default is 120 seconds.
TimeOutInterval	The time out interval between RIP update and all
	interfaces.
DefImportMetric	Sets the value of the default import metric to import
	a route into a RIP domain. For announcing OSPF
	internal routes into a RIP domain, if the policy does
	not specify a metric value, the default import metric
	should be used. For OSPF external routes, the
	external cost is used.

3Click Apply.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks