Nortel Networks NN47200-503 To configure a Dhcp entry, use the following procedure, Dhcp Relay tab

296IP Routing Configuration and Management

DHCP Relay

Use the DHCP relay tab to view and configure the DHCP settings for the switch.

To view the DHCP Relay tab, select IP Routing > DHCP from the Device Manager menu. The following figure illustrates the DHCP Relay tab.

DHCP Relay tab

To configure a DHCP entry, use the following procedure:

Creating a DHCP entry

Step Action

1From the Device Manager, select IP Routing > DHCP. The DHCP Relay tab appears.

2Click the Insert button. The DHCP, Insert DHCP Relay dialog, as illustrated in the following figure, appears.

Insert DHCP Relay

3Make the new DHCP progressRelay entry in the fields provided. The following table describes the fields in the Insert DHCP Relay dialog.

Insert DHCP Relay fields

Field	Description
AgentAddr	The IP address configured on an interface.
ServerAddr	The IP address of the DHCP server. This IP
	address should be a remote address, so the
	DHCP packet is sent through unicast to the
	remote device.
Enable	Enables the DHCP mode.
Mode	Indicate whether this entry pertains to BOOTP
	packets, DHCP packets, or both.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks