Nortel Networks NN47200-503 Stub Area Metrics configuration, Ospf dialog Stub Area Metrics tab

234IP Routing Configuration and Management

Step Action

1Select IP Routing > OSPF from the Device Manager menu. The OSPF dialog opens.

2Select the Areas tab.

3Select an AreaID to delete.

4Click Delete.

—End—

Stub Area Metrics configuration

The Stub Area Metrics tab of the OSPF dialog is used to configure stub area metrics associated with different types of service. To configure these parameters, use the following procedure:

Step Action

1Select IP Routing > OSPF from the Device Manager menu. The OSPF dialog will open. Select the Stub Area Metrics tab. This tab is illustrated below.

OSPF dialog - Stub Area Metrics tab

2Using the fields provided, configure the stub area metrics. These fields are described in the table below.

Stub Area Metrics tab fields

Field	Description
AreaId	The unique ID of the stub area.
TOS	The Type of Service associated with the metric.
Metric	The metric value applied to the indicated type of
	service. By default, this equals the least metric at the
	type of service among the interfaces to other areas.
Status	Displays the status of the entry; Active or Not Active.
	This field is read-only.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks