200IP Routing Configuration and Management

5530-24TFD# config terminal

5530-24TFD(config)# router ospf enable

5530-24TFD(config)# router ospf

5530-24TFD(config-router)# network 10.1.20.3

f.Configure VRRP VIP address for VLAN 2 on R2

5530-24TFD# config terminal

5530-24TFD(config)# router vrrp ena

5530-24TFD(config)# interface vlan 2

5530-24TFD(config-if)# ip vrrp address 1 10.1.20.1 5530-24TFD(config-if)# ip vrrp 1 enable

5530-24TFD(config-if)# ip vrrp 1 backup-master enable

Note: Fast Advertisement is disabled by default. Fast advertisement is proprietary to Nortel to support an advertisement interval from 200 to 1000 milliseconds (ms) with a default of 200. If fast VRRP advertisement is desired, enable fast advertisement.

—End—

Configuration command listing This following list is a complete sequence of the commands used in this configuration:

1.Configuration for R1

#MLT CONFIGURATION # config t

mlt 1 member 2/1-2/2 mlt 1 ena

vlan port 2/2-2/2 tagging enable interface mlt 1

ist enable peer-ip 2.1.1.2 vlan 3999 mlt 2 member 1/48,1/47

mlt 2 enable interface mlt 2 smlt 1

#VLAN CONFIGURATION # config t

vlan members remove 1 1/47-1/48,2/1-2/2 vlan create 2 type port

vlan members remove 2 1/1-1/46,2/3-2/8,3/1-3/8 vlan members add 2 1/47-1/48,2/1-2/2 interface vlan 2

ip address 10.1.20.2 255.255.255.0 router ospf enable

router ospf network 10.1.20.2

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 200
Image 200
Nortel Networks NN47200-503 manual Configure Vrrp VIP address for Vlan 2 on R2, End