Nortel Networks NN47200-503 Ip ospf transmit-delay command, Ip ospf message-digest-key command

IP routing configuration using the CLI 99

ip ospf transmit-delay command

The ip ospf transmit-delaycommand is used to define the transmit delay for this OSPF interface.

The syntax of the ip ospf transmit-delaycommand is:

ip ospf transmit-delay <interval>

The <interval> parameter is the transmit delay in seconds. This is an integer value between 0 and 3600.

The ip ospf transmit-delaycommand is executed in the Interface Configuration mode.

ip ospf message-digest-key command

The ip ospf message-digest-keycommand is used to define the MD5 keys referenced in the ip ospf primary-md5-keycommand.

The syntax of the ip ospf message-digest-keycommand is:

ip ospf message-digest-key <key_number> md5 <key_value>

The <key_number> parameter represents the MD5 key to be configured. This is an integer value between 1 and 255. The <key_value> parameter represents the value of the key being configured. This is a string value of up to 16 characters in length.

The ip ospf message-digest-keycommand is executed in the Interface Configuration mode.

OSPF show commands

OSPF functionality provides a wide range of commands used to display statistics and configured parameters for the router. These commands are available for use in any command mode. OSPF Show commands are outlined in the table below.

OSPF show commands

Command	Description
show ip ospf	Displays general information on OSPF
	configuration.
show ip ospf accept	Displays information on OSPF advertising
	routers.
show ip ospf area	Displays configuration information about the
<ip_address>	OSPF area specified in the <ip_address>
	parameter. Omitting this parameter displays
	information for all OSPF areas.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks