Nortel Networks NN47200-503 manual Area virtual-link message-digest-key command

94IP Routing Configuration and Management

no area virtual-link <A.B.C.D.> <W.X.Y.Z> [authentication- key]

no area virtual-link command parameters

Parameter	Description
<A.B.C.D.>	Specifies the transit area Id expressed as an IP address.
<W.X.Y.Z>	Specifies the neighbor router ID expressed as an IP
	address.
authentication-key	Specifies the unique identifier assigned to the
	authentication key

The no area virtual-linkcommand is executed in the Router

Configuration mode.

area virtual-link message-digest-key command

Use the area virtual-link message-digest-key command to create a virtual interface message digest key.

The syntax for the area virtual-linkmessage-digest-keycommand is:

area virtual-link message-digest-key <A.B.C.D.> <A.B.C.D./0- 32> <1-255> md5-key <WORD>

area virtual-link message-digest key command parameters

Parameter	Description
<A.B.C.D.>	Specifies the transit area Id expressed as an IP address.
<W.X.Y.Z>	Specifies the neighbor router ID expressed as an IP
	address.
<1-255>	Specifies the primary MD5 key value, expressed as an
	integer from 1-255.
md5-key <WORD>	Specifies the user-selected key used to encrypt OSPF
	protocol packets for transmission.

The area virtual-link message-digest-key command is executed in the Router Configuration mode.

no area virtual-link message-digest-key command

Use the no area virtual-link message-digest-key command to delete a virtual interface message digest key.

The syntax for the no area virtual-link message-digest-key command is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks