Nortel Networks NN47200-503 Default ip rip proxy-announce command, Default ip rip receive command

IP routing configuration using the CLI 81

default ip rip poison enable

The default ip rip poison command is executed in the Interface Configuration mode.

default ip rip proxy-announce command

The default ip rip proxy-announce command is used to disable proxy announcement on the interface.

The syntax of the default ip rip proxy-announce command is:

default ip rip proxy-announce enable

The default ip rip proxy-announce command is executed in the Interface Configuration mode.

default ip rip receive command

The default ip rip receive command is used to set the default RIP version to listen to on this interface.

The syntax of the default ip rip receive command is:

default ip rip receive <rip_version>

The default ip rip receive command is executed in the Interface Configuration mode.

default ip rip send command

The default ip rip send command is used to set the default RIP version to send on this interface.

The syntax of the default ip rip send command is:

default ip rip send <rip_version>

The default ip rip send command is executed in the Interface Configuration mode.

default ip rip supply command

The default ip rip supply command is used to set ip rip supply to the default value which is enabled.

The syntax of the default ip rip supply command is:

default ip rip supply enable

The default ip rip supply command is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks