Nortel Networks NN47200-503 manual No area virtual-link command, Word

		IP routing configuration using the CLI 93
area virtual-link parameters
Parameter	Description
<A.B.C.D.>	Specifies the transit area ID expressed as an IP address.
<A.B.C.D./0-32>	Specifies the neighbor router ID expressed as an IP
	address.
authentication-key	Specifies the unique identifier assigned to the
<WORD>	authentication key.
authentication-type	Specifies one of the following authentication types:
	•	none
	•	simple
	•	password
	•	message digest MD5
	TIP: Up to 2 MD5 keys are allowed for message digest.
	The default authentication type is none.
primary-md5-key	Specifies the user-selected key used to encrypt OSPF
	protocol packets for transmission.
dead-interval	Specifies the time interval, in seconds, that a Hello
	packet has not been transmitted from the virtual interface
	before its neighbors declare it down. Expressed as an
	integer from 0-2147483647, the default dead interval
	value is 60 seconds.
hello-interval	Specifies the time interval, in seconds, between
	transmission of Hello packets from the virtual interface.
	Expressed as an integer from 1-65535, the hello-interval
	default value is 10 seconds.
retransmit-interval	Specifies the time interval, in seconds, between link
	stage advertisement retransmissions for adjacencies
	belonging to the virtual interface. Expressed as an
	integer from 0-3600, the default value is 5 seconds.
transit-delay	Specifies the estimated number of seconds required
	to transmit a link state update packet over the virtual
	interface. Expressed as an integer from 0-3600, the
	default value is 1 second.

The area vitual-linkcommand is executed in the Router Configuration mode.

no area virtual-link command

Use the no area virtual-linkcommand to delete a virtual interface. The syntax for the no area virtual link command is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks