Hitachi US7070447-001 manual CLI Commands, Problem Cannot establish a telnet session to the switch

Draft Level—Hitachi Confidential

HiSpeed Switch Troubleshooting Guide

￿and performance issues. If using static routes on the HiSpeed switch, you must configure those routes on those directly connected switches and routers. On the HiSpeed switch, use the following command:

/INET/SHOW >static /INET/CONFIG/ROUTE/add

Problem: Cannot establish a telnet session to the switch.

Solution: The HiSpeed switch uses the well known TCP port 23 for Telnet. Verify that the socket is in a ‘Listen’ state.

/INET/SHOW >iconnect:

CLI Commands

/INET/CONFIG/ipr		Enables/disables Route Cache Forwarding.
/INET >ping <hostname>		Performs an ICMP echo request.
[NumberofPackets]
/INET >rlogin <hostname>		Used when logging onto a Unix server.
/INET/CONFIG/ROUTE >		Commands available for configuring static and
•	ADD	default routes.
•	DEFAULT
•	DELETE
•	RMDEFAULT
/INET/SHOW >		Commands available for displaying Routing
•	ARP	tables, ARP cache, and TCP/IP connections.
•	ROUTE
•	STATIC
•	ICONNECT
•	RTCACHE
/INET >stats		Commands available for displaying IP statistics.
•	FORWARD
•	ICMP
•	IP
•	SNMP
•	TCP
•	UDP

10-6 US7070447-001, Rev 01