Nortel Networks NN47200-503 manual Route policy deletion, Deleting a route policy Step Action

272IP Routing Configuration and Management

SetMetric	If configured, the switch sets the metric
	value for the route while announcing or
	redistributing. The default-import-metric is 0.
	If the default is configured, the original cost of
	the route is advertised into OSPF; for RIP, the
	original cost of the route or the default value
	is used.
SetMetricType	Applicable to OSPF protocol only. If
	configured, sets the metric type for the routes
	to be announced into the OSPF routing
	protocol that matches this policy. The default
	is type 2. This field is applicable only for
	OSPF announce policies.
SetInjectNetList	If configured, the switch replaces the
	destination network of the route that matches
	this policy with the contents of the specified
	prefix list.
SetMask	Indicates the mask to used for routes that
	pass the policy matching criteria.

5Click Insert.

—End—

Route policy deletion

To delete a route policy, use the following procedure.

Deleting a route policy

Step Action

1From the Device Manager main menu, select IP Routing. The IP Routing menu appears.

2Select Policy. The Policy dialog opens.

3Select the Route Policy tab.

4Select an Id to delete.

5Click Delete.

—End—

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks