Nortel Networks NN47200-503 manual No ip dhcp-relay fwd-path command, Show vlan dhcp-relay command

118IP Routing Configuration and Management

The following table describes the parameters for this command.

ip dhcp-relay fwd-path disable parameters

Parameter	Description
<A.B.C.D>	Enter the IP address of the DHCP agent on the
	forwarding path to be disabled.
<O.P.Q.R>	Enter the IP address of the DHCP server on the
	forwarding path to be disabled.

The ip dhcp-relay fwd-path disable command is executed in the Global Configuration command mode.

The DHCP relay feature is enabled by default.

no ip dhcp-relay fwd-path command

The no ip dhcp-relayfwd-pathcommand removes the specified DHCP forwarding path globally on the Nortel Ethernet Routing Switch 5500 Series.

The syntax for the no ip dhcp-relayfwd-pathcommand is:

no ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R>

The following table outlines the parameters for this command.

no ip dhcp-relay fwd-path parameters

Parameter	Description
<A.B.C.D>	Enter the IP address of the DHCP agent on the
	forwarding path to be removed.
<O.P.Q.R>	Enter the IP address of the DHCP server on the
	forwarding path to be removed.

The no ip dhcp-relayfwd-pathcommand is executed in the Global Configuration command mode.

show vlan dhcp-relay command

The show vlan dhcp-relaycommand displays the current DHCP relay forward path configuration for each VLAN on the Nortel Ethernet Routing Switch 5500 Series.

The syntax for the show vlan dhcp-relaycommand is:

show vlan dhcp-relay [<1-4094>]

Substitute <1-4094>above with the VLAN ID of the VLAN to be displayed.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks