Nortel Networks NN47200-503 Show ip dhcp-relay counters command, Ip dhcp-relay clear-counters

116IP Routing Configuration and Management

show ip dhcp-relay counters command

The show ip dhcp-relay counters command displays the current DHCP relay counters configuration globally on the Nortel Ethernet Routing Switch 5500 Series. This includes the number of requests and the number of replies.

The syntax for the show ip dhcp-relay counters command is:

show ip dhcp-relay counters

The show ip dhcp-relay counters command is executed in the User EXEC command mode.

ip dhcp-relay clear-counters

The ip dhcp-relay clear-counters command clears the counters for an interface.

The syntax for this command is:

ip dhcp-relay clear-counters

This command is executed in the Interface Configuration command mode while editing a VLAN only.

This command has no parameters.

show ip dhcp-relay fwd-path command

The show ip dhcp-relay fwd-path command displays the current DHCP relay forward path configuration globally on the Nortel Ethernet Routing Switch 5500 Series which includes the interface, the server, the state (enabled or disabled), and the mode.

The syntax for the show ip dhcp-relayfwd-pathcommand is:

show ip dhcp-relay fwd-path

The show ip dhcp-relayfwd-pathcommand is executed in the User EXEC command mode.

ip dhcp-relay fwd-path command

The ip dhcp-relayfwd-pathcommand sets the mode for the specific forwarding path DHCP relay settings globally on the Nortel Ethernet Routing Switch 5500 Series.

The syntax for the ip dhcp-relayfwd-pathcommand is:

ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R>

The following table outlines the parameters for this command.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks