Nortel Networks NN47200-503 Default ip rip holddown command, Default ip rip in-policy command

80IP Routing Configuration and Management

default ip rip holddown command

The default ip rip holddown command is used to restore the default RIP holddown setting for the interface.

The syntax of the default ip rip holddown command is:

default ip rip holddown

The default ip rip holddown command is executed in the Interface Configuration mode.

default ip rip in-policy command

The default ip rip in-policycommand is used to delete the in policy associated with this interface.

The syntax of the default ip rip in-policycommand is:

default ip rip in-policy <policy_name>

The default ip rip in-policycommand is executed in the Interface Configuration mode.

default ip rip listen command

The default ip rip listen command is used to set the ip rip listen to the default value which is enabled.

The syntax of the default ip rip listen command is:

default ip rip listen enable

The default ip rip listen command is executed in the Interface Configuration mode.

default ip rip out-policy command

The default ip rip out-policycommand is used to delete the out policy associated with this interface.

The syntax of the default ip rip out-policycommand is:

default ip rip out-policy <policy_name>

The default ip rip out-policycommand is executed in the

Interface Configuration mode.

default ip rip poison command

The default ip rip poison command is used to disable RIP poison reverse on the interface.

The syntax of the default ip rip poison command is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks