IP routing configuration using the CLI 77

Use the interface key word to display RIP statistics by interface. Omission of this key word displays general RIP information

The show ip rip command is executed in the Global Configuration mode.

default router rip command

The default router rip command is used to return the switch to the default global RIP state (disabled).

The syntax of the default router rip command is:

default router rip enable

The default router rip command is executed in the Router Configuration mode.

default default-metric command

The default default-metriccommand is used to return the switch to the factory default RIP default import metric.

The syntax of the default default-metriccommand is:

default default-metric

The default default-metriccommand is executed in the Router Configuration mode.

default timers basic holddown command

The default timers basic holddown command is used to return the switch to the factory default RIP holddown timer.

The syntax of the default timers basic holddown command is:

default timers basic holddown

The default timers basic holddown command is executed in the Router Configuration mode.

default timers basic timeout command

The default timers basic timeout command is used to return the switch to the factory default RIP timeout timer.

The syntax of the default timers basic timeout command is:

default timers basic timeout

The default timers basic timeout command is executed in the Router Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks

Page 77
Image 77
Nortel Networks NN47200-503 manual Default router rip command, Default default-metric command