Nortel Networks NN47200-503 manual Ospf Hosts information, Ospf Host creation, Hosts tab

246IP Routing Configuration and Management

—End—

OSPF Hosts information

Use the Hosts tab of the OSPF dialog to view virtual neighbor information. Use the following procedure to view OSPF Hosts information:

Step Action

1Select IP Routing > OSPF from the Device Manager menu. The OSPF dialog opens.

2Select the Hosts tab. The Hosts tab illustration follows.

Hosts tab

3Use the fields on the tab, as described in the following table, to view the Hosts information.

Hosts fields

Field	Description
IpAddress	Specifies the host IP address.
TOS	Specifies the configured route type of service.
	TIP: the value in this field should be 0 as TOS-based
	routing is not supported.
Metric	Specifies the configured cost of the host.
AreaID	Specifies the ID of the area connected to the host.

4Click one of the labelled buttons across the bottom of the tab to refresh the information in the view, insert or delete information, copy settings, export information to an external file, or print.

—End—

OSPF Host creation

To create an OSPF host, use the following procedure.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks