Nortel Networks NN47200-503 manual Ip rip default-listen command, No ip rip default-listen command

IP routing configuration using the CLI 71

The ip rip cost command is executed in the Interface Configuration mode.

ip rip default-listen command

The ip rip default-listencommand is used to enable the acceptance of default route advertisements.

The syntax of the ip rip default-listencommand is:

ip rip default-listen {enable}

The ip rip default-listencommand is executed in the Interface Configuration mode.

no ip rip default-listen command

The no ip rip default-listencommand is used to disable the acceptance of default route advertisements.

The syntax of the no ip rip default-listencommand is:

no ip rip default-listen {enable}

The no ip rip default-listencommand is executed in the Interface Configuration mode.

ip rip default-supply command

The ip rip default-supplycommand is used to enable the advertisement of default routes on the interface.

The syntax of the ip rip default-supplycommand is:

ip rip default-supply {enable}

The ip rip default-supplycommand is executed in the Interface Configuration mode.

no ip rip default-supply command

The no ip rip default-supplycommand is used to disable the advertisement of default routes on the interface.

The syntax of the no ip rip default-supplycommand is:

no ip rip default-supply {enable}

The no ip rip default-supplycommand is executed in the Interface Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks