Emerson 6081-P Setting a Security Code, Procedure Setting a security code, Choose Calib or Config

MODEL 6081-P pH/ORP	SECTION 8.0
	PROGRAMMING THE TRANSMITTER

8.5 SETTING A SECURITY CODE

8.5.1 Purpose

This section describes how to set a security code. There are three levels of security: a. A user can view the default display and information screens only.

b. A user has access to the calibration menus only. c. A user has access to all menus.

The security code is a three-digit number. The table shows what happens when security codes are assigned to Calib (calibration) and Config (configure). In the table XXX and YYY are the assigned security codes.

	Code assignments
	Calib	Config	What happens
	000	XXX	User enters XXX and has access to all menus.
	XXX	YYY	User enters XXX and has access to calibration menus only. User enters YYY and has access to
			all menus.
	XXX	000	User needs no security code to have access to all menus.
000		000	User needs no security code to have access to all menus.

8.5.2 Procedure: Setting a security code.

1.Press MENU. The menu screen appears. Choose Program.

2.Choose >>.

3.Choose Security.

4.Choose Calib or Config.

a.If you chose Calib, enter a three-digit security code.

b.If you chose Config, enter a three-digit security code.

5.To return to the main display, press MENU the EXIT.

29