MODEL | SECTION 8.0 |
| PROGRAMMING THE TRANSMITTER |
8.4CHOOSING TEMPERATURE UNITS AND MANUAL OR AUTOMATIC TEMPERATURE COMPENSATION
8.4.1 Purpose
This section describes how to do the following:
1.Choose temperature display units (°C or °F).
2.Choose automatic or manual temperature compensation.
3.Enter a temperature for manual temperature compensation
8.4.2 Definitions
1.AUTOMATIC TEMPERATURE COMPENSATION. The analyzer uses a
2.MANUAL TEMPERATURE COMPENSATION. In manual temperature compensation, the analyzer converts measured voltage to pH using the temperature entered by the user. It does not use the actual process tem- perature. Do NOT use manual temperature compensation unless the process temperature varies no more than about ±2°C or the pH is between 6 and 8. Manual temperature compensation is useful if the sensor tempera- ture element has failed and a replacement sensor is not available. If manual temperature correction is selected, the display will not show the measured temperature. It will show the manually entered value.
8.4.3 Procedure: Temperature.
To choose a menu item, move the cursor to the item and press ENTER.
To store a number or setting, press ENTER.
1.Press MENU. The main menu screen appears. Choose Program.
2.Choose Temp.
3.Choose °C/F to change temperature units. Choose Live/Manual to turn on (Live) or turn off (Manual) auto- matic temperature compensation.
a.If °C/F is chosen, select °C or °F in the next screen.
b.If Live/Manual is chosen, select Live or Manual in the next screen.
c.If Manual is chosen, enter the temperature in the next screen. The temperature entered in this step will be used in all subsequent measurements, no matter what the process temperature is.
28
