Emerson 6081-P Section Programming the Transmitter, General, Changing START-UP Settings

MODEL 6081-P pH/ORP	SECTION 8.0
	PROGRAMMING THE TRANSMITTER

SECTION 8.0

PROGRAMMING THE TRANSMITTER

8.1General

8.2Changing Start-up Settings

8.3Choosing and Configuring the Analytical Measurement

8.4Choosing Temperature Units and Manual or Auto Temperature Compensation

8.5Setting a Security Code

8.6Making HART-Related Settings

8.7Resetting Factory Calibration and Factory Default Settings

8.8Selecting a Default Screen and Screen Contrast

8.9Choosing a Display Timeout

8.1GENERAL

This section describes how to program the transmitter using the keypad.

1.Select the measurement to be made (pH, ORP, or Redox).

2.Choose temperature units and automatic or manual temperature mode.

3.Set a security code.

4.Make certain settings relating to HART communication.

5.Resetting factory default settings.

6.Selecting a default display screen and adjusting screen contrast.

8.2 CHANGING START-UP SETTINGS

When the Model 6081 is powered up for the first time, startup screens appear. The screens prompt the user to enter the measurement being made, to identify the sensor being used, to select automatic or manual pH correction and to select temperature units. If incorrect settings were entered at startup, enter the correct set- tings now. To change the measurement, refer to Section 8.4.

25