MODEL 6081-P pH/ORP

SECTION 3.0

 

WIRING

SECTION 3.0

SENSOR WIRING

3.1General Information

3.2Sensor Wiring

3.1 GENERAL INFORMATION

pH and ORP sensors without preamps manufactured by Rosemount Analytical can be wired directly to the Model 6081-P wireless transmitter.

3.2 SENSOR WIRING

To assist in sensor wiring, please refer to the one of the following resources:

1.Sensor Instruction Sheet – provided with each shipped sensor. Detailed wiring drawings show terminal block connections for each sensor lead.

2.Online wiring program available at http://www.emersonprocess.com/raihome/liquid/products/wiring/Xmt displays wiring schematics for all compatible pH sensors.

3.CD-ROM included in every shipped instrument unit contains Rosemount Analytical’s wiring program.

Note: all sensor wiring must be rated for 70 ºC.

The following drawing identifies each terminal block lead position for pH sensors.

Figure 3-1. Model 6081 Sensor Wiring & Connection Points

13

Page 23
Image 23
Emerson 6081-P instruction manual Section Sensor Wiring, General Information