Emerson 6081-P Selecting a Default Screen and Screen Contrast, Choose Default Display

MODEL 6081-P pH/ORP	SECTION 8.0
	PROGRAMMING THE TRANSMITTER

8.8 SELECTING A DEFAULT SCREEN AND SCREEN CONTRAST

8.8.1 Purpose

This section describes how to do the following:

1.Set a default screen. The default screen is the screen shown during normal operation. The 6081 allows the user to choose from a number of screens. Which screens are available depends on the measurement the transmitter is making.

2.Change the screen contrast.

8.8.2 Procedure: Choosing a display screen.

1.Press MENU. The menu screen appears. Choose Display.

2.Choose Default Display.

3.Press ￿ until the desired screen appears. Press ENTER.

4.The display returns to the screen in step 2. Press MENU then EXIT to return to the main display.

8.8.3 Procedure: Changing screen contrast.

1.Press MENU. The menu screen appears. Choose Display.

2.Choose Display Contrast.

3.To increase the contrast, select darker. Press ENTER. Each key press increases the contrast. To reduce the contrast, select lighter, Press ENTER. Each key press decreases the contrast.

4.To return to the main display, press MENU then EXIT.

NOTE:

Screen contrast can also be adjusted from the main display. Press MENU and ￿ at the same time to increase contrast. Press MENU and ￿ at the same time to decrease contrast. Repeatedly pressing the arrow key increases or reduces the contrast.

31