A
A – Command Line Interface Show Setup Command
The following is an example of the Show Setup System command:
SANbox #> show setup system |
|
System Information |
|
| |
Eth0NetworkDiscovery | Static |
Eth0NetworkAddress | 10.20.11.32 |
Eth0NetworkMask | 255.255.252.0 |
Eth0GatewayAddress | 10.20.8.254 |
AdminTimeout | 30 |
InactivityTimeout | 0 |
LocalLogEnabled | True |
RemoteLogEnabled | False |
RemoteLogHostAddress | 10.0.0.254 |
NTPClientEnabled | True |
NTPServerAddress | 51.68.85.102 |
EmbeddedGUIEnabled | True |
|