Q-Logic 59226-00 B manual Trap Severity Options

A – Command Line Interface Set Setup Command

S

Examples The following is an example of the Set Setup SNMP command:

SANbox #> admin start

SANbox (admin) #> set setup snmp

A list of attributes with formatting and current values will follow.

Enter a new value or simply		press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency,	alert, critical, error, warning, notify, info, debug, mark
SNMPEnabled	(True /	False)		[True	]
Contact	(string, max=64		chars)	[<sysContact undefined]
Location	(string, max=64		chars)	[sysLocation undefined]
Trap1Address	(dot-notated IP		Address)	[10.20.71.15	]
Trap1Port	(decimal value)			[162	]
Trap1Severity	(see allowed options above)			[warning	]
Trap1Version	(1 / 2)			[2	]
Trap1Enabled	(True /	False)		[False	]
Trap2Address	(dot-notated IP		Address)	[0.0.0.0	]
Trap2Port	(decimal value)			[162	]
Trap2Severity	(see allowed options above)			[warning	]
Trap2Version	(1 / 2)			[2	]
Trap2Enabled	(True /	False)		[False	]
Trap3Address	(dot-notated IP		Address)	[0.0.0.0	]
Trap3Port	(decimal value)			[162	]
Trap3Severity	(see allowed options above)			[warning	]
Trap3Version	(1 / 2)			[2	]
Trap3Enabled	(True /	False)		[False	]
Trap4Address	(dot-notated IP		Address)	[0.0.0.0	]
Trap4Port	(decimal value)			[162	]
Trap4Severity	(see allowed options above)			[warning	]
Trap4Version	(1 / 2)			[2	]
Trap4Enabled	(True /	False)		[False	]
Trap5Address	(dot-notated IP		Address)	[0.0.0.0	]
Trap5Port	(decimal value)			[162	]
Trap5Severity	(see allowed options above)			[warning	]
Trap5Version	(1 / 2)			[2	]
Trap5Enabled	(True /	False)		[False	]
ReadCommunity	(string, max=32		chars)	[public	]
WriteCommunity	(string, max=32		chars)	[private	]
TrapCommunity	(string, max=32		chars)	[public	]
AuthFailureTrap	(True /	False)		[False	]
ProxyEnabled	(True /	False)		[True	]

A-60 59226-00 B