Symbol LS9203 Product Reference Guide7-4
3. Select the USB device type. See USB Device Type on page 7-5.
4. On first installation when using Windows, the software prompts to select or install the “Human Interface Device” driver. To
install the “Human Interface Device” driver provided by Windows click “Next” through all the choices and click “Finished”
on the last choice. The scanner powers up during this installation.
5. If not using a North American keyboard, scan the appropriate country bar code under USB Country Keyboard Types (Country
Codes) on page 7-8.
If there are any problems with the system, see Troubleshooting on page 3-3.
USB Default Parameters
Table 7-1 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s) provided in the Parameter
Descriptions section beginning on page 7-5.
See Chapter A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.

Table 7-1. USB Host Default Table

Parameter Default Page Number
USB Host Parameters
USB Device Type HID (Human Interface Device)
Keyboard Emulation
7-5
USB Country Keyboard Types (Country Codes) North American 7-8
USB Keystroke Delay No Delay 7-14
USB CAPS Lock Override Disable 7-16
USB Ignore Unknown Characters Send Bar Codes 7-17
Emulate Keypad Disable 7-18
USB Keyboard FN1 Substitution Disable 7-19
Function Key Mapping Disable 7-20
Simulated Caps Lock Disable 7-21
Convert Case Disable 7-22
Note