Symbol LS9203 Product Reference Guide4-4
User Preferences Default Parameters
Table 4-1 lists the defaults for user preferences parameters. To change any option, scan the appropriate bar code(s) provided in the
User Preferences section beginning on page 4-5.
See Chapter A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.

Table 4-1. User Preferences Default Table

Parameter Default Page Number
User Preferences
Set Default Parameter All Defaults 4-5
Beeper Tone High 4-7
Beeper Volume High 4-9
Laser On Time 3.0 Sec 4-10
Beep After Good Decode Enable 4-11
Time-out Between Same Symbol 0.6 sec 4-12
Time-out Between Different Symbols 0.2 sec 4-12
Time Delay to Low Power Mode 30 Minutes 4-13
Note