Symbol LS9203 Product Reference Guide6-4
See Chapter A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 6-1. RS-232 Host Default TableParameter Default Page Number
RS-232 Host Parameters
RS-232 Host Types Standard16-7
Baud Rate 9600 6-11
Parity None 6-15
Check Receive Errors Enable 6-18
Hardware Handshaking None 6-19
Software Handshaking None 6-22
Host Serial Response Time-out 2 Se c 6-25
RTS Line State Low RTS 6-28
Stop Bit Select 1 6-29
Data Bits 8-Bit 6-30
Beep on <BEL> Disable 6-31
Intercharacter Delay 0 msec 6-32
Nixdorf Beep/LED Option Normal Operation 6-35
Ignore Unknown Characters Send Bar Codes 6-37
1User selection is required to configure this interface and this is the most common selection.
Note